Dell blcwxfg User Guide - Page 179
Display Assembly, Removing the Display Assembly
View all Dell blcwxfg manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
2 Connect the coin-cell battery connector to the connector on the system board. 3 Install the keyboard (see "Installing the Keyboard" on page 177). 4 Install the hinge cover (see "Installing the Hinge Cover" on page 175). Display Assembly CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the Tablet-PC. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the Tablet-PC. Removing the Display Assembly 1 Follow the procedures in "Before You Begin" on page 155. 2 Remove the hinge cover (see "Removing the Hinge Cover" on page 174). 3 Remove the keyboard (see "Removing the Keyboard" on page 176). 4 Remove any installed Mini-Cards (see "Removing a Mini-Card" on page 171). 5 Use the pull-tab to disconnect the display cable from the system board. Adding and Replacing Parts 179