Dell blcwxfg User Guide - Page 193
Installing the Fan, Pen and Whip Antenna Assembly, Removing the Pen and Whip Antenna Assembly
View all Dell blcwxfg manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
1 M2 x 3-mm screws (4) 3 fan cable connector 2 fan Installing the Fan 1 Seat the fan into the system board, and tighten the four M2 x 3-mm screw using a #0 Phillips screwdriver. 2 Connect the fan cable to the system board. 3 Install the system board (see "Installing the System Board" on page 191). 4 Install the palm rest (see "Installing the Palm Rest" on page 189). 5 Install the keyboard (see "Installing the Keyboard" on page 177). 6 Install the display assembly (see "Installing the Display Assembly" on page 182). 7 Install the hinge cover (see "Installing the Hinge Cover" on page 175). 8 Install any Mini-Cards (see "Installing a Mini-Card" on page 173). Pen and Whip Antenna Assembly CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the Tablet-PC. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the Tablet-PC. Removing the Pen and Whip Antenna Assembly 1 Follow the procedures in "Before You Begin" on page 155. 2 Remove the hinge cover (see "Removing the Hinge Cover" on page 174). 3 Remove the display assembly (see "Removing the Display Assembly" on page 179). 4 Remove the keyboard (see "Removing the Keyboard" on page 176). Adding and Replacing Parts 193