Dell blcwxfg User Guide - Page 174
Hinge Cover, Removing the Hinge Cover
View all Dell blcwxfg manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
2 Align the card with the connector at a 45-degree angle, and press the card into the connector until it clicks. NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mini-Card. 3 Connect the cables to the Mini-Card, ensuring that you route the cables correctly. 4 Replace the memory and Mini-Card cover, and tighten the two captive screws. See "Installing the Memory and Mini-Card Cover" on page 168. Hinge Cover CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the Tablet-PC). NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover. Removing the Hinge Cover 1 Follow the procedures in "Before You Begin" on page 155. 2 Turn the Tablet-PC top-side up, and then open the display all the way (180 degrees) so that the display rests on your work surface. NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously. Removing the hinge cover in a different way than described may cause the plastic to break. 174 Adding and Replacing Parts