Dell blcwxfg User Guide - Page 178
Removing the Coin-cell Battery
View all Dell blcwxfg manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the Tablet-PC. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the Tablet-PC. Removing the Coin-cell Battery 1 Follow the procedures in "Before You Begin" on page 155. 2 Remove the hinge cover (see "Removing the Hinge Cover" on page 174). 3 Remove the keyboard (see "Removing the Keyboard" on page 176). 4 Remove the coin-cell battery connector from the connector on the system board. 5 Using your fingers, pry the coin-cell battery from the system base. 1 2 1 coin-cell battery connector 2 coin-cell battery Installing the Coin-Cell Battery 1 Place the battery into position, pressing firmly to affix the battery to the sticky tape on the base. 178 Adding and Replacing Parts