Dynex DX-E401 User Guide (English) - Page 26

26 Configuring the router 3 Enter the following settings, as appropriate: Field Description Name The name referencing the special application. Trigger Port The port used to trigger the application. It can be either a single port or a range of ports. Trigger Type The protocol used to trigger the special application. Public Port The port number on the WAN side that will be used to access the application. You can define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Public Type The protocol used for the special application. CONFIGURING IP FILTERS Filters are used to deny or allow LAN computers from accessing the Internet. The router can be set up to deny access to internal computers by their IP or MAC addresses. The router can also block users from accessing restricted Web sites. To configure IP filters: 1 Access the Configuration menu by following the instructions in To access the Web-based configuration utility: on page 13. 2 Click the Advanced tab, then the Filters button. The Filters screen opens.