EMC DS-16B Installation Guide - Page 24
Install the bezel supports on the flange at the end of the left
View all EMC DS-16B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing the DS-16B2 Switch Rail Assembly Screw (4) Figure 18 Rail Assembly Screw (4) EMC2051 Tightening the Front and Rear Rail Assembly Screws 8. Install the bezel supports on the flange at the end of the left and right rails. Align the two holes in the bezel support with the top and bottom holes on the flange. See Figure 19. 24 EMC Departmental Switch DS-16B2 Installation Guide
24
EMC Departmental Switch DS-16B2
Installation Guide
Installing the DS-16B2 Switch
Figure 18
Tightening the Front and Rear Rail Assembly Screws
8.
Install the bezel supports on the flange at the end of the left and
right rails. Align the two holes in the bezel support with the top
and bottom holes on the flange. See Figure 19.
EMC2051
Rail
Assembly
Screw
(4)
Rail Assembly
Screw
(4)