EMC DS-16B Installation Guide - Page 25
see table on Plug the power cords into the outlets at the back of the switch.
View all EMC DS-16B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing the DS-16B2 Switch 9. Secure the bezel support with two M3 x 8-mm pan head screws (see table on page 8). Bezel Support M3 x 8-mm Pan Head Screw (2 Per Bezel Support) Bezel Support EMC2052 Figure 19 Installing the Bezel Supports 10. Plug the power cords into the outlets at the back of the switch. Slide the excess cable back into the channels in the rails. See Figure 20. Figure 20 Plugging in the ac Power Cords EMC2053 EMC Departmental Switch DS-16B2 Installation Guide 25
EMC Departmental Switch DS-16B2
Installation Guide
25
Installing the DS-16B2 Switch
9.
Secure the bezel support with two M3 x 8-mm pan head screws
(see table on page 8).
Figure 19
Installing the Bezel Supports
10.
Plug the power cords into the outlets at the back of the switch.
Slide the excess cable back into the channels in the rails. See
Figure 20.
Figure 20
Plugging in the ac Power Cords
EMC2052
Bezel
Support
M3 x 8-mm
Pan Head Screw
(2 Per Bezel
Support)
Bezel
Support
EMC2053