Edimax IC-3110P Manual

Edimax IC-3110P Manual

Get Edimax IC-3110P PDF manuals and user guides View all Edimax IC-3110P manuals
Add to My Manuals
Save this manual to your list of manuals

Edimax IC-3110P manual content summary:

  • Edimax IC-3110P | Manual - Page 1
    IC-3110 / IC-3110W / IC-3110P User Manual 04-2012 / v1.0
  • Edimax IC-3110P | Manual - Page 2
    source code. The GNU GPL and GNU LGPL software codes used in Edimax products are distributed without any warranty and are subject to the copyrights of their respective authors. The firmware files for this product can be found under the "Download" page at the Edimax website (www.edimax.com). 1
  • Edimax IC-3110P | Manual - Page 3
    Camera Installation 12 1.7 Locate the IP Address of this Network Camera 13 1.8 Using the Camera Admin Software to Locate the Camera 17 2.1 Camera III: Using Surveillance Software 71 3-1 Installing Network Camera Surveillance Software 71 3-2 Using Network Camera surveillance software 75 2
  • Edimax IC-3110P | Manual - Page 4
    3-3 Configure Network Camera surveillance software 78 3-3-1 Configure cameras 78 3-3-2 General Settings 85 3-4 Change Display Layout 90 3-5 Full-screen mode 93 3-6 Scan...94 3-7 Zoom-in / Zoom-out 95 3-8 PTZ ...96 3-9 Snapshot...97 3-10 Recording 98 3-11 Video Playback 99 Chapter IV: How to
  • Edimax IC-3110P | Manual - Page 5
    the package to claim for missing contents. Item Name 1 Network Camera 2 Antenna(wireless model only) 3 Power Adapter 4 Ethernet Cable 5 Driver and User Manual CD-ROM 6 Accessory kit 7 Quick Installation Guide Quantity 1 1 1 1 1 1 1 System Requirements • Computer with Windows® 7, Vista or XP • PC
  • Edimax IC-3110P | Manual - Page 6
    is an ideal product for all kinds of video surveillance purposes, like home/office safety, kid/pet monitoring, and remote video acquire etc. Edimax IC-3110 series is tailor made to stream live video over your network. You can view the Network camera's video from anywhere on your local computers or
  • Edimax IC-3110P | Manual - Page 7
    need is a browser like Internet Explorer 6 (and above, with plugin installed). With supplied video surveillance software, you can connect up to 16 video cameras and view images captured by every camera at the same time. Supports 3 video resolutions: MJPG and H.264 SXGA(1280 x 1024), VGA (640 x 480
  • Edimax IC-3110P | Manual - Page 8
    Front View LAN LED WLAN LED Power LED Light Sensor IR LED Camera Focus Ring LAN LED: Indicates LAN activity WLAN LED: Indicates Wireless LAN activity (only work on wired model plugged with USB WiFi dongle and wireless model) Power LED: Indicates power status IR LEDs: Lights up when environment
  • Edimax IC-3110P | Manual - Page 9
    Top View Wired model USB Port POE model SD Card Slot Wireless model Antenna SD Card Slot: Accepts SD / SD-HC memory card for image / video storage USB Port: Connects to certain wireless module. Antenna Base: Connects to supplied antenna 8
  • Edimax IC-3110P | Manual - Page 10
    WPS: click the button on IP Cam and click it on the AP you want to connect wireless connection.(works on wired model with USB wifi dongle plugged or wireless model) Reset to Default Button: Press and hold for more than 10 seconds to reset the camera settings to factory default value. Power Connector
  • Edimax IC-3110P | Manual - Page 11
    Back View Tripod Connector: Connects to any standard tripod / camera wall holder. MAC Address Label: Shows the MAC address of this Network Camera. Useful when you can't locate the camera on the network. 10
  • Edimax IC-3110P | Manual - Page 12
    ) The power LED will flash and light up when the camera is powered on and ready for access to Cloud. LAN port not in use LAN port in use Transferring data via LAN port Wireless LAN not in use Wireless LAN in use Waiting for WPS connection from AP and flash speed is
  • Edimax IC-3110P | Manual - Page 13
    1.6 Camera Installation Please follow the following instructions to set your Network Camera up. 1. Unpack the product package and check if anything's missing. 2. Connect the Ethernet cable to your local area network, and connect the other end to the LAN jack of this Network Camera. NOTE: You can
  • Edimax IC-3110P | Manual - Page 14
    1.7 Locate the IP Address of this Network Camera Default IP address of this Network Camera is 192.168.2.3. If you wish to assign another IP address to this Network Camera, you have to log onto the web configuration interface of the camera first. If the left three fields of the IP address of your
  • Edimax IC-3110P | Manual - Page 15
    2. Double-click 'Network Connections' icon. 3. Right-click 'Local Area Connection', and click 'Properties'. 14
  • Edimax IC-3110P | Manual - Page 16
    4. Select 'Internet Protocol (TCP/IP)', then click 'Properties'. 15
  • Edimax IC-3110P | Manual - Page 17
    2 methods to recover it: a. Press and hold the 'Reset' button located at the bottom of this Network Camera, to clear all settings of the Network Camera and reset the IP address back to 192.168.2.3. You'll lose all settings in the Network Camera. b. Ask network administrator to check the DHCP release
  • Edimax IC-3110P | Manual - Page 18
    local area network. Please insert the user manual CD-ROM supplied in the product package, and the CD will automatically running the installation, if not please double-click 'EdiView Finder utility_v1.0.5' icon :'. Then follow the following instructions to install and use camera admin software: 17
  • Edimax IC-3110P | Manual - Page 19
    finder installer, and click 'Run' when you're prompted: 2. Ediview finder will list all Ediamx network cameras found on local network, with their IP address and MAC address: You can click icon to find network cameras on local network again, or select an network camera and click Icon to configure it
  • Edimax IC-3110P | Manual - Page 20
    3. Ediview finder will inspect network camera's connection type and if it's connected to Internet, this may take a few seconds, please be patient 19
  • Edimax IC-3110P | Manual - Page 21
    wired or wireless). When you see this message, click 'Next' to continue. If you don't want to change network camera's name and password, you can click 'X' on the upper-right corner of window to close ediview finder utility . 5. You can input these information to configure network camera. Camera Name
  • Edimax IC-3110P | Manual - Page 22
    be displayed here. If you wish to connect to certain camera by web browser, double-click the camera listed here. The camera admin software also provides several functions: Language change: This camera finder utility supports 3 languages: English, Chinese, and Simplified Chinese. You can select the
  • Edimax IC-3110P | Manual - Page 23
    Search camera: Click this button to search all cameras on local area network again. Configure camera: Click this button to configure camera's network and security setting. You'll be prompted to input camera's password: 22
  • Edimax IC-3110P | Manual - Page 24
    the password (default: 1234) and click OK to configure the camera's network and security setting: In 'Lan Setting' page, you can configure camera's network settings. Select 'DHCP' to set the camera to obtain an IP address from DHCP server on local area network automatically, and select 'Manual IP
  • Edimax IC-3110P | Manual - Page 25
    powered (Power LED is on), and then launch Internet Explorer and type the IP address of the network camera in address bar of Internet Explorer. You should be prompted to input the user name and password: Default user name is 'admin' and password is '1234'. Click 'OK' to continue after user name and
  • Edimax IC-3110P | Manual - Page 26
    If this is the first time you log onto web management interface, you'll be prompted to install ActiveX Plugin: When you see this message, please click 'OK', and click 'Download the latest ActiveX' link to download plugin so you can use this camera: Click 'Run' to download plugin: 25
  • Edimax IC-3110P | Manual - Page 27
    Click 'Run' to install plugin: Please click 'Next' button to start installation (click 'Next' or 'Install' when you're prompted, until installation is complete). 26
  • Edimax IC-3110P | Manual - Page 28
    Click 'Finish' to complete plugin installation. Now you can go back to web browser, and you should be able to see the image captured by camera (You may need to press F5 or CTRL-R to reload web page). 27
  • Edimax IC-3110P | Manual - Page 29
    one of these messages (or both): OR Your computer may not have the display capability that this Network Camera requires, or you don't have Microsoft DirectX® installed. Please download Microsoft DirectX® from Microsoft's website (http://www.microsoft.com), and try again. In some cases, your computer
  • Edimax IC-3110P | Manual - Page 30
    Chapter II: Using Web Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is 'Camera', and this is the only menu you can see the real-time image from camera. You can always back to this menu by clicking 'Camera' on the top of web management
  • Edimax IC-3110P | Manual - Page 31
    Different encoding type requires different bandwidth, and provides different video quality. If the place where this Network Camera points to has a (or more) fluorescent light of saved image file (default filename is current date and time). Default directory used to save image file is 'C:\', you 30
  • Edimax IC-3110P | Manual - Page 32
    the directory used to save video file. You can transmit the voice received by your computer's microphone to the camera's external speaker. Press and hold the microphone. Please note that external speaker must be connected to this camera. If you wish to enlarge certain portion of the captured image,
  • Edimax IC-3110P | Manual - Page 33
    mode (uses all available space to display the image captured by this camera). *Please note: If you're not using Microsoft Internet Explorer as web browser, some functionalities may not work properly. 32
  • Edimax IC-3110P | Manual - Page 34
    -related settings of this Network Camera in 'Video' menu. You can access this menu by clicking 'Video' on the top of web management interface. There are 5 types of video settings for this Network Camera. To set the option of a certain video setting, put mouse cursor on it and its options will appear
  • Edimax IC-3110P | Manual - Page 35
    '30' to '1', indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video watching experience and will not lose details of video, but requires more network bandwidth. If you're using this video camera with insufficient network bandwidth, selecting
  • Edimax IC-3110P | Manual - Page 36
    '30' to '1', indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video watching experience and will not lose details of video, but requires more network bandwidth. If you're using this video camera with insufficient network bandwidth, selecting
  • Edimax IC-3110P | Manual - Page 37
    '30' to '1', indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video watching experience and will not lose details of video, but requires more network bandwidth. If you're using this video camera with insufficient network bandwidth, selecting
  • Edimax IC-3110P | Manual - Page 38
    Description Select 'Enable' to enable on-screen display function (information about this camera will be displayed on camera's display image), and select 'Disable' to disable it. Select 'Enable' to show camera's name on camera's display image, select 'Disable' to hide it. Select 'Enable' to show
  • Edimax IC-3110P | Manual - Page 39
    2.1.5 Night Vision This camera equips with 10 IR LEDs to enhance video quality in the night. You can enable or disable IR use IR LEDs, even it's very dark. Turn IR LEDs on, even it's very bright. Let camera decide to switch LED lights on or off automatically: LEDs will light up when it's too dark. If
  • Edimax IC-3110P | Manual - Page 40
    -related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if you want to change IP address, use PPPoE, Dynamic DNS, and activate UPnP function. You can access this click the network setting you wish to set, and then refer to instructions given below: 39
  • Edimax IC-3110P | Manual - Page 41
    2.2.1 LAN You can define IP address and select the port number you wish to use here. 40
  • Edimax IC-3110P | Manual - Page 42
    it's not 80, you'll have to add ':port' after the IP address / hostname of this Network Camera. Enable PPPoE User Name Password MTU For example, if the HTTP port number you specified here is 90 and the IP address of Network Camera is 10.20.20.30, then you have to input 'http://10
  • Edimax IC-3110P | Manual - Page 43
    most of ISPs and will give you a nice network performance. Click 'Apply' to save settings and make the new settings take effect. 42
  • Edimax IC-3110P | Manual - Page 44
    disable it. Select the network type of wireless connection. Available options are 'Infrastructure' (Connect the Network Camera to a wireless access point), and 'Adhoc' (This Network Camera will become a stand-alone wireless network point, other wireless computers / devices can discover this Network
  • Edimax IC-3110P | Manual - Page 45
    access point, and you have computers with wired network connection. Here shows all wireless access points found by this Network Camera. Please note not all access points will be displayed at the same time, if the access point you expected to connect does not appear, you
  • Edimax IC-3110P | Manual - Page 46
    into the WPS enabled access point to establish WPS connection. Click this button and this camera will enter PBC-style WPS connection state for 120 seconds. Please push 'Start PBC' button on the wireless access point you wish to connect within 120 seconds to establish WPS connection (The remaining
  • Edimax IC-3110P | Manual - Page 47
    below: Item Enable DDNS Provider Host Name User Name Password Description Select 'Enable' to activate Dynamic DNS function of this Network Camera, select 'Disable' to disable it. Select dynamic DNS service provider here. Dyndns.org or no-ip.com is available currently. Input dynamic DNS host name
  • Edimax IC-3110P | Manual - Page 48
    automatically (only those in the same local network). This function is useful and you don't have to remember the IP address of this Network Camera. Simply open 'Network neighbor' and it's there! The descriptions of every setting in this menu will be given below: Item Enable UPnP Description
  • Edimax IC-3110P | Manual - Page 49
    Click the message to open 'My Network Places', and you'll see the Network Camera: You can double-click the icon to launch Internet Explorer and log onto Network Camera's web management interface directly. 48
  • Edimax IC-3110P | Manual - Page 50
    , and click 'Apply' to save settings, then other users can access the image by this filename with .jpg extension with the camera's IP address as prefix. For example, if your camera's IP address is '192.168.2.1' and the filename you set here is 'picture', then everyone on the web can access the image
  • Edimax IC-3110P | Manual - Page 51
    video captured by this Network Camera by your own RTSP (Real Time Streaming Protocol) media player, you can use this function to setup RTSP parameters, so your RTSP-compatible player will be able to receive video of RTSP here. Default setting is 554. Input the path of MPEG4 RTSP video file. When you
  • Edimax IC-3110P | Manual - Page 52
    will detect the motion in captured image, and take a snapshot when motion is detected. So you can use this camera to keep the safety of the belongings you have. To use motion detection, click the following link from the top of menu: After you selected '
  • Edimax IC-3110P | Manual - Page 53
    Motion Detection You can use this menu to setup basic motion detection settings: The descriptions of Select the time interval between two motions from dropdown menu. When a motion is detected, camera will not detect any motion again within the time interval you specified here. Available options
  • Edimax IC-3110P | Manual - Page 54
    file size is 100. Select 'Enable' to save file to a network folder which supports SAMBA (also known as 'Windows Network Neighborhood'), select 'Disable' to disable this function. If username and password are not required to write files in specified folder, select 'Anonymous'; if required, select
  • Edimax IC-3110P | Manual - Page 55
    2.3.2 Motion Region You can define the motion detection region within the image that camera captures, so this camera will ignore motions which are not covered by the motion region setting, and reduce the chances of false alarm. The descriptions of every setting in
  • Edimax IC-3110P | Manual - Page 56
    will only detect major changes in the image). In case the objects of the image captured by the camera moved, click this button to reload the image captured by camera, so you can decide the motion detection region more precisely. Save motion detection region settings. To change the motion detection
  • Edimax IC-3110P | Manual - Page 57
    identify the mail sent from this camera from others quickly. Input the IP address or host name of the software (like Outlook, Outlook Express etc.), or ask your network administrator or ISP. Input the Email address of mail sender, this will help you to identify the Email sent by this Network Camera
  • Edimax IC-3110P | Manual - Page 58
    SMTP server you're using in your Email software (like Outlook, Outlook Express etc.), or ask your network administrator or ISP. Please input the user name of SMTP server here, if your SMTP server requires the use of authentication. Please input the password of SMTP server here, if your SMTP server
  • Edimax IC-3110P | Manual - Page 59
    2.3.4 FTP Configuration You can set FTP server's parameters here. The descriptions of every setting in this menu will be given below: Item FTP Server FTP Port User Name Password Remote Folder Description Input the IP address or host name of the FTP server you wish to use here. Input the port
  • Edimax IC-3110P | Manual - Page 60
    , you can try to use passive mode. Click 'Apply' to save settings and make the new settings take effect. After that, you can click 'Upload a test file' to send a file to the FTP server you set here, so you can make sure the setting you specified here is correct and working
  • Edimax IC-3110P | Manual - Page 61
    , do not check this box. Specify the filename prefix (the texts which will be added before the file sequence number). Specify the folder name that camera will store the saved image or video clip. Click 'Apply' to save settings and make the new settings take effect. 60
  • Edimax IC-3110P | Manual - Page 62
    2.4 System Info You can use this menu to get the operational information of this camera: After you selected 'System Info.', a sub-menu will appear. There are 4 sub-menus available here: Detailed descriptions of every setting will be given below. 61
  • Edimax IC-3110P | Manual - Page 63
    Name Description Please specify the name of this Network Camera here. This can be used to identify your camera on the network when you have more than one Network Camera in the same network. Password Confirm Password Default name begins with 'IC-' plus the last 6 characters of the MAC address of
  • Edimax IC-3110P | Manual - Page 64
    the date and time of the real time clock in this Network Camera. You can set the time manually, or use network time protocol (NTP) to set the time automatically input the IP address or host name of NTP server here. You can use default value 'pool.ntp.org', or ask your ISP for the IP address or host
  • Edimax IC-3110P | Manual - Page 65
    computer to 'Set Date / Time manually' field. Click 'Apply' to the computer which is connecting to the camera, click 'Synchronize to PC time' You can use this menu to setup Schedule Snapshot/Recording settings: Item Enable configure FTP server parameters in 'FTP Configuration' menu first, so
  • Edimax IC-3110P | Manual - Page 66
    You have to configure e-mail settings in 'Email' menu first, so this function will take effect. This option allows the network camera to send one choose to upload each recorded video with different file name composed of date/time, or to choose to upload the recorded video with the same file name
  • Edimax IC-3110P | Manual - Page 67
    prompted to select another valid firmware file again. Reset to Factory Defaults The Network Camera will reboot after the upgrade procedure is done. PLEASE NOTE THAT THE IP ADDRESS OF THE CAMERA WILL RESET TO DEFAULT VALUE: 192.168.2.3 Clear all settings in the camera. Please think again before you
  • Edimax IC-3110P | Manual - Page 68
    IP address of your computer does not begin with '192.168.2', and subnet mask is not '255.255.255.0', or you'll not be able to connect to this Network Camera again. If you found the Network Camera this Network Camera, like firmware version, system uptime, date / time, and network information. 67
  • Edimax IC-3110P | Manual - Page 69
    don't want to allow them to modify system settings, you can give them user-level user name and password, so they can only view the image and can not change any system setting. This camera supports up to 16 users. After you selected 'Account', you'll be prompted to input user account information
  • Edimax IC-3110P | Manual - Page 70
    available. Input the login name (user name) of this account. Input the password of this user here. Input the password of this user here again for confirmation. Select the privilege of this user: (including administrator) will be able to view the image of Network Camera at the same time. 69
  • Edimax IC-3110P | Manual - Page 71
    2.6 SDHC ... After you selected 'System Info.', a sub-menu will appear. There are 4 sub-menus available here: Please click the SD card setting you wish to set then refer to instructions given below: 70
  • Edimax IC-3110P | Manual - Page 72
    2.6.1 Status Here shows the remaining card space for you. 71
  • Edimax IC-3110P | Manual - Page 73
    2.6.2 Space Alarm When you're using SD card to store captured image and video clip, you can have this camera to send an E-mail to you when there's only little remaining space left on port number according to your mail server. Select 'Enable' if your SMTP server supports SSLv2/v3 such as gmail. 72
  • Edimax IC-3110P | Manual - Page 74
    setting is necessary when the SMTP server which sends e-mails performs authentication. Type the password of the user who has the mail account. This setting is necessary when the SMTP take effect. You can click 'Send a test email' button to send a test E-Mail by the configuration you set here. 73
  • Edimax IC-3110P | Manual - Page 75
    2.6.3 File Management You can use this menu to manage the files stored on SD card. The descriptions of every setting in this menu will be given below: Item FirstPage PrevPage NextPage LastPage SelectAll ClearAll Delete Description Jump to first page of file list. Jump to previous page of file
  • Edimax IC-3110P | Manual - Page 76
    Software The Network Camera surveillance software provides various functions like video recording, after this software is installed, you can use your Network Camera to safeguard your property. Please follow the following instructions to install the surveillance software. 1. Double click the setup
  • Edimax IC-3110P | Manual - Page 77
    3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click 'Next' to continue. 76
  • Edimax IC-3110P | Manual - Page 78
    4. Here lists all options you chose in previous steps, if everything's correct, click 'Install' to start installing procedure, or click 'Back' to go back to previous step to modify installing settings. 5. The installing procedure will take some time, please be patient. 77
  • Edimax IC-3110P | Manual - Page 79
    6. When you see this window, it means the software installing procedure is complete. Please click 'Finish' to finish the procedure (Network Camera surveillance software will start after you click 'Finish' button, if you want to start it later, uncheck 'Launch IPCam Surveillance Software' box). 78
  • Edimax IC-3110P | Manual - Page 80
    for all components of Network Camera surveillance software: Video displaying area Language Display layout Full screen / Scan Zoom Out / Zoom In Close window (stop surveillance) / Minimize window Message display box PTZ Control / Home Recording / System configure Playback / Snap shot 79
  • Edimax IC-3110P | Manual - Page 81
    to change the direction that camera points to. This function is only available for supported cameras. Click this button to return the camera to 'Home' (default) position. This function is only available for supported cameras. Start video recording. Configure Software / camera configuration. 80
  • Edimax IC-3110P | Manual - Page 82
    display Close window (stop surveillance) Displays all system messages like camera is disconnected etc. Terminates Network Camera surveillance software. Minimize window Minimizes Network Camera surveillance software window. Video displaying Displays the image of all cameras by the display layout
  • Edimax IC-3110P | Manual - Page 83
    Camera surveillance software 3-3-1 Configure cameras Before you use this Network Camera surveillance software, you must configure the camera(s) you wish to connect. Please click 'System configure' button and a popup menu will appear: Please select 'Configure Cameras' to configure cameras
  • Edimax IC-3110P | Manual - Page 84
    parameters of selected camera in every camera configuration fields. Rescan all cameras on your local network. If you didn't see the camera you expected in 'Camera Search' box, or new cameras has been joined to your local network after last scan. Input the name of camera here. Default value is the
  • Edimax IC-3110P | Manual - Page 85
    default it's '80'. Password Input the password of camera. Default value is '1234'. You should change the password if you changed the password of selected camera. Video Format** Select the video encoding format of this camera (MJPEG or MPEG4). Reset Clear all fields in 'Camera Configuration
  • Edimax IC-3110P | Manual - Page 86
    3-3-1-2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-defined schedule. Here are the descriptions of all setting items: Item Channel One Time Schedules New (One Time Schedules) Description Select
  • Edimax IC-3110P | Manual - Page 87
    Edit Delete New (Weekly Schedules) Please specify the time duration of this one-time schedule (the date and time of 'From' and 'To'), then click 'OK' to save settings. Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. You can modify a
  • Edimax IC-3110P | Manual - Page 88
    Edit Delete OK Cancel Please check all weekdays that applies, and set the start time in 'From' field. You can set the duration of video recording in 'Period' field (format is HH:MM:SS), and the end time will be calculated automatically and displayed in 'To' field. You can also
  • Edimax IC-3110P | Manual - Page 89
    Channel Mute Audio Record Video Only OK Cancel Description Select the channel number you wish to set. Check this box and the Network Camera surveillance software will not play the audio captured by this camera. Check this box and the Network Camera surveillance software will not record the audio
  • Edimax IC-3110P | Manual - Page 90
    concerned, it's not recommended to use this function since some tiny changes you may need to know may not be able to trigger the camera and the camera will not start recording. Here are the descriptions of all setting items: Item Channel Enable Disable Recording Time Invoke alarm when motion is
  • Edimax IC-3110P | Manual - Page 91
    triggered Send mail when motion is triggered OK Cancel Send an email to a pre-defined address when a motion has been detected by the camera. Save settings in this tab. Discard all settings in this tab. 90
  • Edimax IC-3110P | Manual - Page 92
    to store the recorded video and captured image. You can click 'Browse' button to pick a directory in your hard disk. Displays remaining storage space. Defines the maximum file size of every video file. When the size of file exceeds this value, Network Camera surveillance software will open another
  • Edimax IC-3110P | Manual - Page 93
    Define the time period to pause between every camera switch when you activate 'Scan' function. You can decide the behavior when hard disk space is full: OK Cancel Disable: Do not overwrite recorded video files. Enable: Overwrite recorded video files. Save settings in this tab. Discard all settings
  • Edimax IC-3110P | Manual - Page 94
    Setting' tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera, please setup your email related parameters here first. Here are the descriptions of all setting items: Item E-Mail Subject Recipient E-Mail Address New Description
  • Edimax IC-3110P | Manual - Page 95
    't know which SMTP server you should use, please refer to the setting of your email software or ask your ISP / network administrator. Specify the port number of the SMTP server you wish to use here. By default (and the setting of most of SMTP servers) it's '25'. Select 'Enable' if your SMTP
  • Edimax IC-3110P | Manual - Page 96
    If you don't want other people to access this Network Camera surveillance software, you can set a password to protect it. You'll need to input the password every time you wish to use this Network Camera surveillance software: To set password, please use 'Security' tab in 'General Options' menu: 95
  • Edimax IC-3110P | Manual - Page 97
    password authentication when this software starts. Password authentication is not required when this software starts. Input the password you wish to use here. Input the password you wish to use here again. 3-3-2-4 About This tab shows the version number of the Network Camera surveillance software
  • Edimax IC-3110P | Manual - Page 98
    3-4 Change Display Layout This Network Camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and camera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly.
  • Edimax IC-3110P | Manual - Page 99
    Layout style 3: 6 Displays the video of up to 6 cameras. Cameras Layout style 4: 8 Displays the video of up to 8 cameras. Cameras Layout style 5: 9 Displays the video of up to 9 cameras. Cameras Layout style 6: Displays the video of up to 10 cameras. 10 Cameras 98
  • Edimax IC-3110P | Manual - Page 100
    Layout style 7: 13 Displays the video of up to 13 cameras. Cameras Layout style 8: 16 Displays the video of up to 16 cameras. Cameras 99
  • Edimax IC-3110P | Manual - Page 101
    3-5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click 'Full Screen' button to switch display mode to full-screen mode. To exit full-screen mode, press 'ESC' key. 100
  • Edimax IC-3110P | Manual - Page 102
    3-6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click 'Scan' button to switch between all configured cameras. NOTE: If a camera is configured but disconnected, it will still be displayed in a scan sequence (you'll see nothing
  • Edimax IC-3110P | Manual - Page 103
    3-7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scope of camera's view, or enlarge the image size of a certain object to see its detail. Please select a camera in video displaying area by clicking on its
  • Edimax IC-3110P | Manual - Page 104
    pan - tilt function ( but this model doesn't support PTZ function), you can change the position that camera points to, to see different places that fall in the scope of camera's view. Please select a camera in video displaying area by clicking on its image, and then click the directions you wish
  • Edimax IC-3110P | Manual - Page 105
    3-9 Snapshot You can take a snapshot of selected camera and save it to 'Snapshot' sub-folder of pre-defined data directory. Click snapshot button once to take a snapshot; you can take as much snapshot as you want before hard disk is full. 104
  • Edimax IC-3110P | Manual - Page 106
    3-10 Recording You can start video recording of selected camera manually by clicking 'Start Recording' button: When recording starts, you'll see a message displayed in message displaying box like '1/1 10:00:00, Camera 2 Start Manual', which means camera 1 starts recording manually on 1/1 at 10:00:00
  • Edimax IC-3110P | Manual - Page 107
    . A new window will appear: You have to search the video file before you can play it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search (search all videos recorded by motion detection function and falls in a specific
  • Edimax IC-3110P | Manual - Page 108
    with iPhone & Android Phones IC-3110 series features smart phone support for iPhone users and Android phone users to monitor their home using Edimax Network-Cameras. Please check following instruction for installation. The following instruction applies to all Edimax routers Step1: Ensure My-PC
  • Edimax IC-3110P | Manual - Page 109
    the Appendix "How to apply for a free DNS account in the http://www.dyndns.org " In this guide, we assume you have already got http://my-name.dyndns.org. (yours may vary) and go to Step 3. Step 3: Configure the 1st Camera based on the following: Configure the 2nd Camera based on the following: 108
  • Edimax IC-3110P | Manual - Page 110
    Configure the Broadband Router based on the following: 109
  • Edimax IC-3110P | Manual - Page 111
    App Installation (1) Please download 'Ediview' application from Apple's Appstore (2) You can launch EdiView by clicking 'EdiView' icon. You'll see welcome screen and please wait for few seconds (3) When you launch EdiView, it will attempt to connect to existing configured network cameras. Please
  • Edimax IC-3110P | Manual - Page 112
    point if your Edimax network camera is located on your local area network. If you want search for network cameras on your local area network, or you want to add an Ediamx network camera on Internet, please click 'Cameras' button to abort and setup network camera manually (4) To view more than 4
  • Edimax IC-3110P | Manual - Page 113
    You can manage network cameras in 'Cameras' list. To add a new network camera, click 'Add New Camera'. (6) EdiView will search for network camera on your local area network, and list all network cameras found here. To add an network camera manually or add an network camera on Internet, click 'Add
  • Edimax IC-3110P | Manual - Page 114
    of this network camera. IP: Input network camera's IP address or host name. Port: Input network camera's port number, generally it's '80'. User Name: Input the user name of network camera. Default user name is 'admin' Password: Input the password of network camera. Default user name is '1234
  • Edimax IC-3110P | Manual - Page 115
    (8) You can also setup video parameters of this network camera. Brightness: Select video brightness (1 to 5, darkest to brightest). Saturation: Select video saturation (1 to 5, lowest to highest). Sharpness: Select video sharpness (1 to 5, lowest to highest). Video Quality: (Highest to Lowest,
  • Edimax IC-3110P | Manual - Page 116
    (9) To delete an existing IP camera, click 'Edit' button. Click camera you wish to delete of the IP (10) Click 'Delete' button to delete IP camera 115
  • Edimax IC-3110P | Manual - Page 117
    (11) Now you can back to 'Live' menu, if you see a snapshot appear, it indicates the network camera is correctly configured. Click snapshot picture to enlarge video view (12) If network camera you connected supports pan/tilt control, you can click the button on the upper-right corner to switch to '
  • Edimax IC-3110P | Manual - Page 118
    note: If the button appears on upper-right corner shows 'Switch', you can't move camera. (13) To view events (motions detected by network camera), click 'Events) button below in network camera's live view All network cameras will be listed and you can choose one to see its events list. (14) All
  • Edimax IC-3110P | Manual - Page 119
    (15) Event's snapshot and event date / time will be displayed. Click the button with network camera's name (upper-left corner) to go back. 118
  • Edimax IC-3110P | Manual - Page 120
    (16) You can use this function to mark your network camera on Google map, so you can locate them and remember their physical location easily. Please note that you need active Internet connection to show map
  • Edimax IC-3110P | Manual - Page 121
    your finger to drag the map and find your current location manually. If the network camera you're about to mark on the map does not locate map and find the location where your network camera is installed. A red pin indicating the location of network camera will be placed at the center of map.
  • Edimax IC-3110P | Manual - Page 122
    4.2 Android App installation (1) To install Ediview application, launch 'Market'. (In your Android device's 'All apps' menu) (2) Click magnifier icon at upper-right corner of Android market, and input 'Ediview' in search field 121
  • Edimax IC-3110P | Manual - Page 123
    (3) You should able able to find Ediview utility (If not, please check spelling), and click 'Download' to download and install Ediview (4) Android will prompt you to confirm installation, please click 'Install' button below to start installation 122
  • Edimax IC-3110P | Manual - Page 124
    (5) Please be patient while EdiView is being installed. (6) When EdiView utility is successfully installed, you'll see this message. Click 'Open' to launch EdiView utility now, or click 'Complete' to launch EdiView utility later 123
  • Edimax IC-3110P | Manual - Page 125
    (7) You can launch EdiView by clicking 'EdiView' icon in 'All Applications (8) When you launch EdiView, it will search for all Edimax network cameras on your network. Please make sure you're connected to wireless access point if your Edimax network camera is located on your local area network. 124
  • Edimax IC-3110P | Manual - Page 126
    cloud mode you have to input Cloud ID**; In IP mode you have to input IP address or host name of network camera User Name: Input the user name of network camera. Default user name is 'admin' Password: Input the password of network camera. Default user name is '1234' Click 'Add' to add a new network
  • Edimax IC-3110P | Manual - Page 127
    successfully, you'll see it appear in EdiView utility's camera list Please repeat last step to add more network cameras you wish to connect. To repeat last step, press 'Menu' key on your Android device and click 'Add' button (11) If the network camera is connected, you'll see a picture appear. Click
  • Edimax IC-3110P | Manual - Page 128
    icon To configure network camera's parameters, click icon (12) When you click an network camera in camera list, you'll see its live image Like this. You can hold your Android device horizontally to enlarge network camera's live image view. If the network camera you connected supports Pan & Tilt
  • Edimax IC-3110P | Manual - Page 129
    (13) To take a snapshot of current live image and save it on your Android device, click button. You'll see 'Save Snapshot' message appear, which indicates a snapshot has been taken. 128
  • Edimax IC-3110P | Manual - Page 130
    (15) To configure the video display parameters of this network camera, click button, and you can drag the slide bar to configure parameters: Brightness: Configure video brightness Saturation: Configure video saturation. Sharpness: Configure video sharpness. Video Quality: Configure video quality by
  • Edimax IC-3110P | Manual - Page 131
    Click 'Done' button when you finish, or click 'Cancel' to abort. You'll see the result after you click Done'. (16) When a new event (movement) has been detected by network camera, you'll see events. icon appear in network camera list. You can click it to see 130
  • Edimax IC-3110P | Manual - Page 132
    (17) All events will be displayed here, with the time which triggered this event. Click on the event to see enlarged picture (18) The image of this event will be displayed with the time triggered this event. To see enlarged picture, hold your Android device horizontally 131
  • Edimax IC-3110P | Manual - Page 133
    event, click button. You'll see 'Saved event image successfully' message to prompt you that image has been saved successfully. (20) When you're in camera list, press 'Menu' button on your Android device. A menu will appear on the bottom of EdiView utility. See live images of network
  • Edimax IC-3110P | Manual - Page 134
    (21) You can use this function to mark your network camera on Google map, so you can locate them and remember their physical location easily. Please note that you need active Internet connection to show map
  • Edimax IC-3110P | Manual - Page 135
    current location manually. If the network camera you're about to mark on the map does not locate at your current location, you can also use your finger to drag the map and find the location where your network camera is installed A blue pin indicating the location of network camera
  • Edimax IC-3110P | Manual - Page 136
    (23) When you found the location where network camera is installed, press 'Menu' button on your Android device and click 'Locate' button and a camera list will be shown. Select the network camera you wish to mark on the map. 135
  • Edimax IC-3110P | Manual - Page 137
    Please make sure your web browser supports JAVA first. If your web browser does not support JAVA, you can install JAVA from website: www.java.com and get JAVA software. (If your web browser does not support JAVA, you'll see this message when you try to use JAVA browser) (1) If you're not
  • Edimax IC-3110P | Manual - Page 138
    your Edimax IP camera, you can log onto network camera's web configuration menu and click "System" -> "System Information" ->"Status"->"LAN" to see its MAC address. (3) If you see this message, click 'Run' to continue (4) Please wait while JAVA loads, and please input your network camera's password
  • Edimax IC-3110P | Manual - Page 139
    (5) You should be able to see the image of network camera now. You can click function buttons below. Enlarge / reduce image size Click + or - button to enlarge or reduce image size, this is very useful when you want to see details of certain object in the image. 138
  • Edimax IC-3110P | Manual - Page 140
    to display network camera configuration menu and you can chage the parameters of IP camera. Click 'Apply' to save changes or click 'Cancel' to discard changes. Pan-tilt control Click this button and a set of arrow will be shown on the image. Click the arrow to move network camera to the direction
  • Edimax IC-3110P | Manual - Page 141
    Snapshot Click this button to take a snapshot of current image and save on your computer's hard drive. You'll be prompted to select a folder on your computer. Full-screen view Click this button to enlarge image view to full-screen size, all functino buttons will disappear to maximumize display area.
  • Edimax IC-3110P | Manual - Page 142
    View multiple cameras simultaneously on PC surveillance software up to 16 cameras at a time Supports 16 additional user accounts for viewing camera Auto sending Snap Shot or video by E-mail or FTP Support NO-IP DNS and UPnP functions Supports Windows 2000/XP/Vista/Win7 Firmware Upgradeable EMI
  • Edimax IC-3110P | Manual - Page 143
    an account named "your-name.no-ip.org" in the http://www.no-ip.com and how this account is configured into Edimax router. Note: http://www.no-ip.com is not a branch or affiliate of Edimax. No commercial relation is involved between these 2 companies. The related service offered in the http://www.no
  • Edimax IC-3110P | Manual - Page 144
    And follow the steps: Now, you could locate your home network camera using http://your-name.no-ip.org 143
  • Edimax IC-3110P | Manual - Page 145
    dealer of purchase for help, please check the troubleshooting list here, this may help you to solve the problem by yourself and therefore saves your valuable time. Scenario I can not connect to network camera Possible Solution a. Please confirm the IP address setting of the computer you're using
  • Edimax IC-3110P | Manual - Page 146
    it could be caused by a slow Internet connection, and it's not a problem caused by camera. However, when the network connection is slow, you should use lower frame rate / resolution. d. Adjust the antenna if you're using wireless connection. The antenna should be perpendicular to the ground to get
  • Edimax IC-3110P | Manual - Page 147
    and / or password of SMTP server is correct, if your SMTP server requires authentication (You can try this by click 'Send a test Email' button). d. Please check log, if FTP upload or Email sending is failed, it will be logged, and this may give you some clue on how to solve the problem. e. Change
  • Edimax IC-3110P | Manual - Page 148
    147
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
IC-3110 / IC-3110W / IC-3110P
User Manual
04-2012 / v1.0