Electrolux E30EW75PPS Complete Owners Guide English - Page 33

Setting Oven Controls 33 Setting Delayed Clean You may wish to set the oven to perform a clean at a later time (up to 12 hours later). The end time key will determine when the cleaning will stop. IMPORTANT! If you want to set a delayed clean to end between 12 and 24 hours, use the user pref key to set the 12hr energy saving mode (ES) to Off and also set the clock (CLO) to the 24 hr mode. The end time must be set far enough from the real time to allow for the type of clean cycle you select, whether 2, 3, or 4 hours. Remember to add 30 to 40 additional minutes of cooling time before using the oven for cooking. In the example below, the clean will start at 4:00 o'clock. The number of hours before 4:00 o'clock will be the delay time before the clean begins. Setting for a heavy (4 hour) clean cycle to end at 8:00 o'clock: 1. Be sure the clock is set with the correct time of day. In this example the time of day should be earlier than 4:00 o'clock. Remove all oven racks. Be sure the oven door is completely closed. 2. Press clean - heavy (4hr). 3. Press cook options. 4. Press end time. 5. Enter 8 0 0 using the numeric keys. 800 6. Press START. 7. The oven door will begin to lock and CLn will show in the display. Once locked, the oven will display the time remaining until clean begins. When the clean cycle begins, the display will show the time remaining in the clean cycle. Press CANCEL at any time to stop clean To avoid possible burns use caution opening the oven door after the clean cycle is finished. The oven may still be very hot. Stand to the side of the oven when opening the door to allow hot air to escape.