Epson BrightLink 585Wi Operation Guide - EasyMP Network Updater - Page 38

Error Messages Failed to update the projector information. The projector cannot be found. Remedy Check the network settings for your computer and the projector, and then try again. Check the network settings for your computer and the projector, and then try again. Parent topic: Error Messages List Related references Solutions When You Cannot Update Firmware or Copy Menu Settings Related tasks Canceling an Update Schedule Updating the Firmware Copying Projector Menu Settings Using Batch Setup Error Messages When Using Batch Setup Error Messages The projector is being updated. Try again after the update is completed. Failed to apply projector settings. Failed to read projector settings from the selected projector. Remedy Wait until the update is completed before using any EasyMP Network Updater features. Make sure the projector is on or the projector's Standby Mode is set to Communication On. Also make sure you select the correct projector, and then apply the settings again. Make sure the projector is on or the projector's Standby Mode is set to Communication On, then click Refresh on the Edit Projector List screen. Then copy the menu settings again. Parent topic: Error Messages List Related tasks Copying Projector Menu Settings Using Batch Setup 38