Epson BrightLink 696Ui Users Guide - Page 269
Solutions When the Interactive Pen Position Is Not Accurate, Display/Easy Interactive Function
View all Epson BrightLink 696Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
• Make sure you are not covering the black section near the tip of the pen. • Make sure the pen tip is securely attached to the pen. • If the pen tip is worn out, dirty, or damaged, you may need to replace it. • Try replacing the soft pen tip with the hard pen tip. • Make sure nothing is blocking the signal between the pen and the interactive pen receiver on the projector. • Try holding the pen at a different angle so that your hand is not blocking the signal. • Make sure the cable cover is in place to keep cables from blocking the signal. • Make sure the pen battery has enough power. Press the button on the side of the pen to check remaining battery power. Try replacing the battery. • If you are projecting from a computer, make sure the USB cable is connected to the computer and projector. • Dim the room lights and turn off any fluorescent lights. Make sure the projection surface and pen receiver are not in direct sunlight or other sources of bright lighting. • Remove any decorative lights from around the projector or projection surface. • Make sure the interactive pen receiver on the projector is clean and free from dust. • Make sure there is no interference from infrared remote controls, mice, or infrared microphones. • Make sure the USB Type B option on the Extended menu is set to Easy Interactive Function or USB Display/Easy Interactive Function. • Make sure you have calibrated the system. Try recalibrating. • Make sure the Pen Mode and Pen Operation Mode settings are set correctly in the Easy Interactive Function options on the Extended menu. • If you are using multiple projectors in the same room, change the Distance of Projectors setting in Easy Interactive Function on the Extended menu. Parent topic: Solving Interactive Problems Related references Projector Setup Settings - Extended Menu Solutions When the Interactive Pen Position Is Not Accurate If the pen position is not the same as the mouse pointer, try the following solutions: • Make sure you have calibrated the system. Try manual calibration. 269