Epson BrightLink 696Ui Users Guide - Page 273
Solutions When You Cannot Access the Projector Through the Web
View all Epson BrightLink 696Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
Wireless Network Projection Related references Projector Setup Settings - Extended Menu Projector Network Settings - Network Menu Solutions When You Cannot Access the Projector Through the Web If you are unable to access the projector through a web browser, make sure you are using the correct ID and password, which are case sensitive. Note: You cannot change the user ID. • To display the Web Control screen, enter EPSONWEB as the user ID, and enter the password set in the projector's Network menu as the password. The default password is admin. • To display the Web Remote screen, enter EPSONREMOTE as the user ID and enter the password set in the projector's Network menu as the password. The default password is guest. • Make sure you have access to the network the projector is on. Note: The user ID and password are case sensitive. Parent topic: Solving Network Problems Solutions When the Image Contains Static During Network Projection If the projected image contains static during network projection, try the following solutions: • Check for any obstacles between the access point, the computer, the mobile device, and the projector; and change their positions to improve communication. • Make sure that the access point, the computer, the mobile device, and the projector are not too far apart. Move them closer together and try to connect again. • If the wireless connection is slow or your projected image contains noise, check for interference from other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away or expand your wireless bandwidth. • Reduce the number of connected devices if the connection speed declines. Parent topic: Solving Network Problems 273