Epson BrightLink 696Ui Users Guide - Page 53
Selecting the Connected USB Source, Connecting to External USB Devices
View all Epson BrightLink 696Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2. Connect the USB cable (or USB flash drive or USB memory card reader) to the projector's USB-A port. Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly. 3. Connect the other end of the cable (if applicable) to your device. Parent topic: Connecting to External USB Devices Related topics Projecting a PC Free Presentation Selecting the Connected USB Source You can switch the projector's display to the source you connected to one of the USB-A ports. To display the connected USB device, select the USB1 source. Note: If you have connected a document camera, select the USB2 source. 1. Make sure the connected USB source is turned on, if necessary. 2. Press the USB button on the remote control. 3. Press the button again to cycle through other USB sources, if available. Parent topic: Connecting to External USB Devices 53