Epson BrightLink 696Ui Users Guide - Page 56
Installing Batteries in the Remote Control, SYNC In, SYNC Out, Sync of Projectors, Wired
View all Epson BrightLink 696Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
1. Connect one end of the cable to the SYNC In port on one projector, and connect the other end to the SYNC Out port on the other projector. Note: If you are connecting three or more projectors, connect the projectors in a chain as shown. 2. In the Extended menu, set the Sync of Projectors setting to Wired. Note: If you are syncing multiple projectors with a combination of wired and infrared connections, set the Wired Sync Mode setting to Mode 2 in each projector's Extended menu. If you are syncing using an infrared connection and the projectors are more than 6.6 feet (2 m) apart, set the Distance of Projectors setting to Mode 1 in each projector's Extended menu. Parent topic: Projector Connections Related references Projector Setup Settings - Extended Menu Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. 56