Epson BrightLink 696Ui Users Guide - Page 272

• If your finger position and cursor position do not match, perform Touch Calibration. • Keep your clothing or parts of your body more than 0.4 inches (1 cm) away from the projection surface. • If touch operation does not work correctly even after calibration, press the icon on the Home screen and check the Calibration Range setting. Select Wide if you drag items when touching the screen, or Narrow if mouse operations do not work smoothly. Parent topic: Solving Interactive Problems Related references Projector Setup Settings - Extended Menu Related tasks Calibrating Automatically Calibrating Manually Calibrating for Finger Touch Interactivity Solving Network Problems Check the solutions in these sections if you have problems using the projector on a network. Solutions When Network Alert E-Mails are Not Received Solutions When You Cannot Access the Projector Through the Web Solutions When the Image Contains Static During Network Projection Parent topic: Solving Problems Solutions When Network Alert E-Mails are Not Received If you do not receive an e-mail alerting you to problems with a projector over the network, try the following solutions: • Make sure the projector is turned on and connected to the network correctly. (If an error shut down the projector, it cannot send an e-mail.) • Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail menu or in the network software. Parent topic: Solving Network Problems Related concepts Wired Network Projection 272