Epson PowerLite 1770W User's Guide - Page 37
Connecting to a Component-to-VGA Video Source, If you are using an adapter, connect these connectors
View all Epson PowerLite 1770W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. Connect the other end to the projector's HDMI port. 1 HDMI port Parent topic: Connecting to Video Sources Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using a component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Make sure the projector and your video source are turned off. 2. Connect the component connectors to your video source's color-coded component video output ports, usually labelled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 3. Connect the VGA connector to the projector's Computer port. 1 Computer port If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Parent topic: Connecting to Video Sources 37