Epson Stylus Pro User Setup Information - Mac - Page 13
Reference Guide, Introduction, personnel under the following conditions
View all Epson Stylus Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
0 Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. 0 Do not let the power cord become damaged or frayed. 0 If you use an extension cord with the printer, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total of all devices plugged into the wall outlet does not exceed 15 amperes. Cl Except as specifically explained in the Reference Guide, do not attempt to service the printer yourself. 0 Unplug the printer and refer servicing to qualified service personnel under the following conditions: If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the cabinet damaged; if the printer does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. 8 Introduction