Epson Stylus Pro User Setup Information - Mac - Page 23
After you install the ink cartridges, the printer charges the ink, close the clamps.
View all Epson Stylus Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Be sure to install both ink cartridges. The printer will not work if only one cartridge is installed. 8. Push down the ink cartridge clamps until they lock in place. Caution: Once you install the ink cartridges, do not open the clamps or remove the cartridges except to replace them with new ones. Once you remove a cartridge, do not reuse it; this may damage the print head. 9. Press the Alt button again to return the print head to its home position. (Even if you do not press Alt, the print head moves back to its home position about 60 seconds after you close the clamps.) After you install the ink cartridges, the printer charges the ink delivery system. This takes about one minute. During this time, the Pause light flashes. When the printer is finished charging, the Pause light stays on without flashing. Caution: Never turn off the printer while the Pause light is flashing. 1-10 Installing the Printer