Epson TM U295 Operation Guide - Page 37
Printing position, Notes - slip
View all Epson TM U295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
10 (.39") NOTE 3. 5.3 (.21") 2.3 (.09") Printing position Adjustable NOTE 1. Mechanical form stopper 12.5 (.49") NOTE 2. TOF sensor (fixed) Printing position at minimum top margin 65.84 (2.59") First printing position 5 (.20") Reverse paper feed Forward paper feed Paper feed roller Last printing position 26.5 (1.04") NOTE 4. 13.8 (.54") NOTE 5. 15.5 (.61") 27.3 (1.07") NOTE 2. BOF sensor (fixed) 12.5 (.49") Notes 1. The mechanical form stopper is adjustable in the range 26.5 to 36.5 mm (1.04 to 1.44"). 2. The TOF and BOF sensors are fixed and cannot be adjusted. 3. After slip paper is set at the mechanical form stopper, the top margin can be shortened up to 21.2 mm (.83") by feeding the paper backwards (ejection feeding). 4. When ejection feeding is not performed after printing, printing can be performed up to the position at which the paper edge is no longer held by the paper feed roller (13.8 mm (.54") from the paper edge). 5. When ejection feeding is performed after printing, the paper can be fed forward up to 11.8 mm (.46") (28 dots) after the bottom edge is detected. Reference Information 4-5