Epson TM U295 Operation Guide - Page 46

n = 5: Slip paper status Bit Off/On Hex Decimal Function 0 Off 00 0 Not used. Fixed to Off. 1 On 02 2 Not used. Fixed to Off. 2 Off 00 0 Slip paper selected. Off 3 On 00 0 08 8 Does not wait for slip paper insertion. Waits for slip paper insertion. 4 On 10 16 Not used. Fixed to On. Off 5 On 00 0 20 32 Slip is detected by the BOF sensor. Slip is not detected by the BOF sensor. Off 6 On 00 0 40 64 Slip is not detected by the TOF sensor. Slip is detected by the TOF sensor. 7 Off 00 0 Not used. Fixed to Off. Bit 3: Bit 5 and 6: [Reference] Becomes Off (not waiting) just before actual slip selection takes place after slip paper is detected Transmits the current status of the TOF and BOF sensors. ESC u, ESC v, GS a CAN [Name] Cancel print data in page mode [Format] ASCII CAN Hex 18 Decimal 24 [Description] In page mode, deletes all the print data in the current printable area. [Notes] • This command is enabled only in page mode. • If data that existed in the previously specified printable area also exists in the currently specified printable area, it is deleted. [Reference] ESC W ESC SP n [Name] [Format] [Range] Set right-side character spacing ASCII ESC SP n Hex 1B 20 n Decimal 27 32 n 0 ≤ n ≤ 32 5-6 Commands