Epson TM U295 Operation Guide - Page 73
this command., The status types to be transmitted are shown below
View all Epson TM U295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
• When Auto Status Back (ASB) is enabled using GS a, the status transmitted by GS r and the ASB status must be differentiated. • If the value of n is out of the specified range, the printer ignores this command. • The status types to be transmitted are shown below: Paper sensor status (n = 1, 49): Bit Off/On Hex Decimal Status for ASB Off 0 On 00 0 01 1 Slip is detected by BOF sensor. Slip is not detected by BOF sensor. Off 1 On 00 0 02 2 Slip is detected by TOF sensor Slip is not detected by TOF sensor. Off 2 On 00 0 04 4 Undefined. Undefined. Off 3 On 00 0 08 8 Undefined. Undefined. 4 Off 00 0 Not used. Fixed to Off. Off 5 On 00 0 20 32 Undefined. Undefined. Off 6 On 00 0 40 64 Undefined. Undefined. 7 Off 00 0 Not used. Fixed to Off. Drawer kick-out connector status (n = 2, 50): Bit Off/On Hex Decimal Status for ASB Off 0 On 00 0 01 1 Drawer kick-out connector pin 3 is LOW. Drawer kick-out connector pin 3 is HIGH. Off 1 On 00 0 02 2 Undefined. Undefined. Off 2 On 00 0 04 4 Undefined. Undefined. Off 3 On 00 0 08 8 Undefined. Undefined. Commands 5-33