Epson TM U295 Operation Guide - Page 68
When Auto Status Back ASB is enabled using, Enable/Disable Automatic Status Back
View all Epson TM U295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Bit Off/On Hex Decimal Function Off 3 On 00 0 08 8 Undefined. Undefined. 4 Off 00 0 Not used. Fixed to Off. Off 5 On 00 0 20 32 Undefined. Undefined. Off 6 On 00 0 40 64 Undefined. Undefined. 7 Off 00 0 Not used. Fixed to Off. [Notes] • When DTR/DSR control is selected, the printer transmits only 1 byte after confirming that the host is ready to receive data (DSR signal is SPACE). If the host computer is not ready to receive data (DSR signal is MARK), the printer waits until the host is ready. When XON/XOFF control is selected, the printer transmits only 1 byte without confirming the condition of the DSR signal. • The ROM version may be changed. • When Auto Status Back (ASB) is enabled using GS a, the status transmitted by GS I and the ASB status must be differentiated. • When n is out of the specified range, this command is ignored. GS a n [Name] Enable/Disable Automatic Status Back [Format] ASCII GS a n Hex 1D 61 n Decimal 29 97 n [Range] 0 ≤ n ≤ 255 [Description] Enables or disables ASB and specifies the status items to include, using n as follows: Bit Off/On Hex Decimal Status for ASB Off 0 On 00 0 0 1 Drawer kick-out connector pin 3 status disabled. Drawer kick-out connector pin 3 status enabled. 5-28 Commands