Fluke 124 FE 123 & 124 Users Manual - Page 47
Using a Printer, Probe Adjustment.
View all Fluke 124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
} Press ENTER to confirm the selection. Observe that the 10 times attenuation of the Probe is compensated in the voltage readout. Probe Adjustment. The Probe of model VP40 such as supplied with the Test Tool is always adapted correctly to its inputs: high frequency adjustment is not necessary. Other 10:1 Probes however must be adjusted for optimal High Frequency performance. How to adjust these Probes is explained in Chapter 2 under 'Using and Adjusting 10:1 Scope Probes'. 1 Using The Test Tool Using a Printer Using a Printer To print a (graphic) hard copy of the present screen, you need to use one of the following: The Optically Isolated RS-232 Adapter/Cable (PM9080) to connect a serial printer to the OPTICAL PORT of the test tool. See Figure 1-22. The Print Adapter Cable (PAC91, optional) to connect a parallel printer to the OPTICAL PORT of the test tool. See Figure 1-23. 39