Foxconn Bloodrage GTI English Manual. - Page 28
Illustration of the Optional Accessory
View all Foxconn Bloodrage GTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2 2-5 Illustration of the Optional Accessory 1. Thermal Peripheral Bag The Foxconn QuantumForce BloodRage is equipped with the second generation 4in1 Heatsink which features much improved aircooling, a full size copper waterblock, and full modularity with a copper base plate with support for third party and custom made cooling solutions. The copper base plate is connected to the CPU PWM and Southbridge via Copper Heatpipes which means improved Northbridge cooling will result lower CPU PWM and Southbridge temperatures as well. . Fan Clip and NB Extra Fan Note that the Heatsink can be removed and mounted in 2 orientations. Insert one metal clip on one side of the Northbridge Heatsink, then lay the bundled fan onto the Heatsink in the desired orientation (push or pull) and pull the metal clip up to slide the fan under it. Note that the metal clip will become more flexible after bending it up several times. Once the first clip is fastened, move the fan slightly down on the other side of the heatsink so you can push in the second clip. Then lift the second clip up and push the fan into the right position. . Waterblock ring To secure watercooling tubes to the Waterblock. See "waterblock" for further details. . Thermal Grease Use this thermal grease when changing the Northbridge Heatsink. . Passive Heatsink Please note that you can install these Heatsinks at your own risk and doing so might void your warranty! They may fall off and short the Motherboard or other components if not mounted properly or if the case is moved around. We recommend using the Heatsinks only in flat horizontal 21