Foxconn Bloodrage GTI English Manual. - Page 33
Onboard Button, 8 Onboard LED
View all Foxconn Bloodrage GTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2 2-7 Onboard Button Power on Button: POWER_ON Push the power on button to power on the system. Reset Button: RESET Push the reset button to reboot the system. Force Reset Button: FORCE_RESET Simply rebooting after applying new OC settings can cause the system to fail because the hardware has not been reset properly. But with one press of the Force Reset button, your system will not only re-boot, but also re-tune itself! This button triggers the CPU, memory controller and chipset to reinitialize, running hardware checks and timing algorithms before reloading with your new overclocking settings. This reduces instances of failed re-boots after implementing OC settings. FORCE_RESET POWER_ON RESET 2-8 Onboard LED DRAM Power LED: The LED lights up indicating the system is on or the system is staying at S1 or S3 sleeping state. +5V Standby LED: It will light whenever the power supply that connected to the motherboard is switched on. DIMM3 SPD Detect LED: The Normal status is on. When the DDR in DIMM3 is not support SPD address in DIMM3, the LED will turn off. WARNING! Do not remove or plug in any device when the onboard LED is lighting on. 26