Foxconn M61PMV English Manual. - Page 36

► OnChip IDE Devices / RAID Config / OnBoard Devices / SuperIO Devices / USB Devices

Page 36 highlights

3 Integrated Peripherals Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals ► OnChip IDE Devices ► RAID Config ► OnBoard Devices ► SuperIO Devices ► USB Devices [Press Enter] Item Help [Press Enter] [Press Enter] Menu Level ► [Press Enter] [Press Enter] Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► OnChip IDE Devices / RAID Config / OnBoard Devices / SuperIO Devices / USB Devices Press [Enter] to go to each submenu. OnChip IDE Devices Phoenix - AwardBIOS CMOS Setup Utility OnChip IDE Devices OnChip IDE Channel IDE DMA Transfer Access SATA Controller [Enabled] Item Help [Enabled] [Enabled] Menu Level ► Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► OnChip IDE Channel This option is used to enable/disable function of IDE drives connected to the PATA interface. ► IDE DMA Transfer Access [Disabled] : to disable DMA transfers for all IDE drives. They will revert to PIO mode transfers. [Enabled] : to enable DMA transfers for all IDE drives. The proper DMA mode will be detected at boot-up. If the drive does not support DMA transfers, then it will use PIO mode instead. ► SATA Controller This option is used to enable/disable function of SATA drives connected to the SATA ports. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

3
29
Integrated Peripherals
► OnChip IDE Devices / RAID Config / OnBoard Devices / SuperIO Devices / USB Devices
Press [Enter] to go to each submenu.
OnChip IDE Devices
► OnChip IDE Channel
This option is used to enable/disable function of IDE drives connected to the PATA interface.
► IDE DMA Transfer Access
[Disabled] : to disable DMA transfers for all IDE drives. They will revert to PIO mode transfers.
[Enabled] : to enable DMA transfers for all IDE drives. The proper DMA mode will be detected
at boot-up. If the drive does not support DMA transfers, then it will use PIO mode instead.
► SATA Controller
This option is used to enable/disable function of SATA drives connected to the SATA ports.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
► OnChip IDE Devices
[Press Enter]
Item Help
► RAID Config
[Press Enter]
► OnBoard Devices
[Press Enter]
Menu Level
► SuperIO Devices
[Press Enter]
► USB Devices
[Press Enter]
↑↓→←:Move
Enter:Select
+/-/PU/PD:Value
F10:Save
ESC:Exit
F1:General Help
F5: Previous Values
F7: Optimized Defaults
Press Enter
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Devices
OnChip IDE Channel
[Enabled]
Item Help
IDE DMA Transfer Access
[Enabled]
SATA Controller
[Enabled]
Menu Level
↑↓→←:Move
Enter:Select
+/-/PU/PD:Value
F10:Save
ESC:Exit
F1:General Help
F5: Previous Values
F7: Optimized Defaults
Enabled