Foxconn M61PMV English Manual. - Page 44
PC Health Status
View all Foxconn M61PMV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Case Open Warning Shutdown Temperature CPU Vcore VTT(V) +3.3V + 5V + 12V 5VSB(V) Voltage of Battery CPU Temperature System Temperature CPU Fan Speed System Fan Speed Smart Fan Control x Start PWM Temperature x Start PWM Value x Slope PWM Value [Disabled] Item Help [Disabled] 1.34 V Menu Level ► 1.88 V 3.34 V 5.16 V 11.90 V 4.99V 3.05V 45oC 39oC 3000 RPM 0 RPM [Disabled] 35 64 2 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Case Open Warning This item is used to enable or disable case open warning function. ► Shutdown Temperature This item is used to set the system temperature upper limit. When the temperature exceeds the set value, the system will shut down automatically. ► CPU Vcore/VTT(V)/+ 3.3V/+5V/+12V/5VSB(V)/Voltage of Battery The current voltages are automatically detected and displayed by the system. ► CPU/System Temperature The CPU/System temperature are automatically detected and displayed by the system. ► CPU Fan/System Fan Speed The CPU fan/System fan speed are automatically detected and displayed by the system. ► Smart Fan Control This option is used to enable or disable smart fan function. Only when this option is enabled, you can set some correlative parameters. ► Start PWM Temperature It allows you set a temperature value from which smart fan starts its operation. ► Start PWM Value It allows you to set an initial PWM value to drive the fan when the temperature reaches Start PWM value and smart fan begins its operation. The higher PWM value can achieve the faster fan speed. ► Slope PWM Value When temperature changes one degree celsius, the PWM will be increased or decreased by a step value accordingly. ► Delta Temp(oC) It is used to set the delta value for temperature. When change of the temperature reaches plus/minus delta value, then the PWM will be increased or decreased by a step value based on the slope formula. 37