Frigidaire FGGF3058RF Complete Owner's Guide - Page 14

SETTING OVEN CONTROLS Setting the clock When the appliance is powered up for the first time or when the electric supply to the appliance has been interrupted, the display will flash "12:00" (Fig. 1). Fig. 2 Fig. 3 Fig. 1 To set the clock for 1:30: Step 1. Press set clock. 2. Enter 1 3 0. 3. Press start to accept. Press NOTES • Be sure to set the clock with the correct time of day before using the oven. • The clock cannot be adjusted when the oven is active with any cooking function or during self-clean. Changing between 6-Hour Energy Saving or continuous bake mode settings The oven control is factory preset with to the 6 Hour Energy Saving mode that will automatically turn the oven off after 6 hours. The control may also be programmed to override this feature to continuously bake. To switch between 6-Hour Energy Saving or continous bake modes: Step Press 1. Press and hold timer on • off for 6 seconds. 2. Press self-clean to toggle between "6 Hr OFF" (Fig. 2) or "StAY On" (Fig. 3) and release keypad. 3. Press start to accept. NOTE Changing between the 6-Hour Energy Saving or continuous bake mode will not change how the cooktop controls operate. Setting 12 or 24 hour display mode The oven control is factory preset to show the time of day with a 12 hour clock. This setting may be changed to provide the time of day with a 24 hour clock. To set 12 or 24 hour display mode: Step Press 1. Press and hold set clock for 6 seconds. 2. Press self-clean to toggle between "12 Hr dAY" or "24 Hr dAY" display modes (See Figs. 4 & 5) and release keypad when the mode you prefer is displayed. 3. Press start to accept. Fig. 4 Fig. 5 14