Frigidaire FGGF3058RF Complete Owner's Guide - Page 31
Self-cleaning
View all Frigidaire FGGF3058RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
If it becomes necessary to cancel self-clean: 1. Press keypad. 2. If the self-clean cycle has heated the oven to a high temperature, the "Hot" (Fig. 1) message will show in the display. Allow enough time for the oven to cool and for the "door OPn" message to display (Fig. 2). When this message turns off the oven door may be opened. Fig. 1 Fig. 2 Restarting a self-clean cycle after a power outage: If a self-clean cycle was interrupted by a power failure, your oven may not have thoroughly cleaned. If so, once power is restored, the oven has cooled and the oven door has unlocked, if needed, set again for self-clean. Starting another self-clean after cancellation: If a self-clean cycle was cancelled using the cancel keypad before the oven was finished cleaning, you may wish to set for another self-clean cycle. If self-clean was cancelled shortly after being started, and the oven interior did not reach high self-clean temperatures, the next clean cycle may be set as soon as the oven door unlocks from the cancelled clean cycle. If the oven became hot enough from the cancelled selfclean cycle, you may be required to wait up to 4 hours before the control will allow another self-clean cycle to start. NOTE If attempting to set "back to back" self-clean cycles, the control may display the messages "CLEAn" , then "dELAy" followed by the length of time to wait before the next self-clean may be set. For example, if the message displayed shows "4:00", the control will not allow for another self-clean cycle to start for the next 4 hours. SELF-CLEANING Setting a delay start self-clean cycle Example: To program a self-cleaning cycle with a delay start time of 9:00 o'clock: Step Press 1. The oven should be empty and all oven racks removed. Remove all items from the cooktop. Be sure the oven door is completely closed. 2. Press delay start. 3. Enter 9 0 0. 4. Press start. 5. Press self clean once for a 3-hour clean time, press self clean twice for 4-hour clean and press 3 times for a 2-hour self-clean cycle time. 6. Press start to accept. Press cancel at any time to stop self-clean. NOTES • Check to be sure the oven is empty before setting a self-clean cycle using a delay start setting. Immediately after setting self-clean with delay start the oven door will lock. The self-clean feature will not start heating the oven for cleaning until reaching the delay start time • The maximum delay start setting is 11 hours & 59 minutes. 31