Frigidaire FGGF3058RF Complete Owner's Guide - Page 15

Notes

Page 15 highlights

SETTING OVEN CONTROLS Changing oven temperature display mode The oven control is preset to display the oven temperature with Fahrenheit values. The control may be changed to display either Fahrenheit or Celsius temperatures. To change the temperature display mode: Step Press 1. Press and hold broil for 6 seconds. 2. Press self-clean to toggle between Fahrenheit or Celsius temperature display modes and release keypad when the mode you prefer is displayed. 3. Press start to accept. NOTE The temperature display mode option cannot be changed when the oven is active with any cooking function or during self-clean. Setting for audible or silent keypad operation Normally a beep will sound each time a keypad is pressed. If desired, the control may be set for silent keypad operation. To switch between audible or silent keypad operation modes: Step Press 1. Press and hold delay start for 6 seconds. 2. Press self-clean to toggle between "bEEP On" (Fig. 1) or "bEEP OFF" (Fig. 2). Release keypad when the mode you prefer is displayed. 3. Press start to accept. Fig. 1 Fig. 2 NOTE When the control is set for silent keypad operation the timer, preheat and any end of cycle or error tone alerts will remain audible. Setting oven lock The control may be programmed to lock the oven door and lock the oven control keypad operations. To activate the oven lock feature: Step Press Press and hold lock keypad for 3 seconds. "door Loc" will appear in the display until the oven door is completely locked. To cancel the oven lock feature: Step Press Press and hold lock keypad for 3 seconds. Once the oven door has unlocked the "door Loc" message will no longer display (See Fig. 3). Fig. 3 NOTES • To avoid possible damage to the oven door latching mechanism, do not attempt to force open the oven door whenever the door Loc message is displayed. • If a control keypad is pressed when oven lock is active, the oven control may produce an error tone (triple beep) indicating the keypad action requested is not available when the oven lock feature is active. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

15
Fig. 1
Fig. 2
To switch between audible or silent keypad
operation modes:
Step
Press
1. Press and hold
delay start
for 6 seconds.
2. Press
self-clean
to toggle between “bEEP On” (Fig. 1)
or “bEEP OFF” (Fig. 2).
Release keypad when the mode you
prefer is displayed.
3. Press
start
to accept.
Fig. 3
Setting for audible or silent keypad
operation
Normally a beep will sound each time a keypad is pressed.
If desired, the control may be set for silent keypad
operation.
SETTING OVEN CONTROLS
NOTE
The temperature display mode option cannot be
changed when the oven is active with any cooking
function or during self-clean.
When the control is set for silent keypad operation the
timer, preheat
and any
end
of cycle or
error
tone
alerts will remain audible.
Setting oven lock
The control may be programmed to lock the oven door
and lock the oven control keypad operations.
To activate the oven lock feature:
Step
Press
Press and hold
lock
keypad for 3 seconds.
door Loc
” will appear in the display until
the oven door is completely locked.
Press and hold
lock
keypad for 3 seconds.
Once the oven door has unlocked the
door Loc
” message will no longer display
(See Fig. 3).
To cancel the oven lock feature:
Step
Press
NOTE
NOTES
• To avoid possible damage to the oven door latching
mechanism, do not attempt to force open the oven
door whenever the
door Loc
message is displayed.
• If a control keypad is pressed when oven lock is active,
the oven control may produce an error tone (triple
beep) indicating the keypad action requested is not
available when the oven lock feature is active.
Changing oven temperature display mode
The oven control is preset to display the oven temperature
with Fahrenheit values. The control may be changed to
display either Fahrenheit or Celsius temperatures.
To change the temperature display mode:
Step
Press
1. Press and hold
broil
for
6 seconds.
2. Press
self-clean
to toggle
between Fahrenheit or Celsius
temperature display modes and
release keypad when the mode
you prefer is displayed.
3. Press
start
to accept.