Fujitsu MAF3364LC Manual/User Guide - Page 104
Refer to of SCSI Logical Interface Specifications for further, Write Cache Enable
View all Fujitsu MAF3364LC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
(3) Caching parameters The following parameters are used to optimize IDD Read-Ahead caching operations under the system environments. Refer to Chapter 2 of SCSI Logical Interface Specifications for further details. a. Read caching parameters Parameter • RCD: Disabling Read-Ahead caching operations • WCE: Write Cache Enable • MS: Specifying the multipliers of "minimum prefetch" and "maximum prefetch" parameters • DISC: Prefetch operation after track switching during prefetching • Number of blocks for which prefetch is suppressed • Minimum prefetch • Maximum prefetch • Number of blocks with maximum prefetch restrictions • Number of segments Default value 0 (enabled) 0 (disabled) 0 (Specifying absolute value) 0 (inhibit) X'FFFF' X'0000' X'00XX' (1 cache segment) X'FFFF' X'4' Notes: 1. When Read-Ahead caching operations are disabled by the caching parameter, these parameter settings have no meaning except write cache feature. 2. Determine the parameters in consideration of how the system accesses the disk. When the access form is not determined uniquely because of the processing method, the parameters can be re-set actively. 3. For sequential access, the effective access rate can be increased by enabling ReadAhead caching operations and Write Cache feature. (4) Control mode parameters The following parameters are used to control the tagged queuing and error logging. C141-E064-03EN 5 - 21