Fujitsu MAF3364LC Manual/User Guide - Page 70
and 1.4 in the SCSI Physical Interface Specifications., bit SCSI interface connector
View all Fujitsu MAF3364LC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
(2) SCSI connector and power supply connector a. 16-bit SCSI The connector for the SCSI bus is an unshielded P connector conforming to SCSI-3 type which has two 34-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.19 shows the SCSI connector. See Section C.2 in Appendix C for the signal assignments on the SCSI connector. For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3 and 1.4 in the SCSI Physical Interface Specifications. The tolerance is ±0.127 mm (0.005 inch) unless otherwise Figure 4.19 16-bit SCSI interface connector b. Power supply connector Figure 4.20 shows the shape and the terminal arrangement of the output connector of DC power supply. Figure 4.20 Power supply connector (16-bit SCSI model) C141-E064-03EN 4 - 17