Fujitsu MAF3364LC Manual/User Guide - Page 36
SCSI Function Specifications, HVD type High Voltage Differential
View all Fujitsu MAF3364LC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2.2 SCSI Function Specifications Table 2.3 shows the SCSI functions provided with the IDD. Table 2.3 SCSI function specifications Item Specification Single-ended type Ο HVD type (High Voltage Differential) × LVD type (Low Voltage Differential) Ο Electrical requirements Single-ended type Position where the terminating × (*1) resistor is mounted on the PCA Differential type Position where the terminating × resistor is mounted on the PCA TERMPWR signal send function Ο 68 pin P cable connector Ο Connector 80 pin SCA2 connector Ο Data bus parity (*2) Ο Bus arbitration function Ο Disconnection/reconnection function Ο Addressing SCSI ID 16-bit SCSI LUN (logical unit number) #0 to #15 (Jumper selection) #0 fixed Data transfer 8-bit SCSI (Single-Ended type) (Synchronous (LVD type) mode) 16-bit SCSI (Single-Ended type) (LVD type) (160/m LVD type) Ο 20 MB/s max. Ο 40 MB/s max. Ο 40 MB/s max. Ο 80 MB/s max. Ο 160 MB/s max. Data buffer 2 MB (LC/LP) or 4 MB (MC/MP) programmable multi- segment buffer (1 to 32) Data block length (Logical data length=Physical data length) (*3) 512 to 528 bytes (Fixed length) Ο : Provided × : Not provided (*1) Single-Ended and LVD detect the driver mode by Diffsence signal and automatically change. (*2) Data bus CRC on MC/MP models. (*3) Refer to (12) of Section 1.1. C141-E064-03EN 2 - 7