Fujitsu MAF3364LC Manual/User Guide - Page 78
SCA2 type SCSI connector, 3 and 1.4 in SCSI Physical Interface Specifications.
View all Fujitsu MAF3364LC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
(2) SCSI connector and power supply connector a. SCA type SCSI The connector for the SCSI bus is an unshielded SCA-2 connector conforming to SCSI-3 type which has two 40-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.27 shows the SCSI connector. See Section C.5 in Appendix C for signal assignments on the connector. For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3 and 1.4 in SCSI Physical Interface Specifications. Figure 4.27 SCA2 type SCSI connector C141-E064-03EN 4 - 25
C141-E064-03EN
4 - 25
(2)
SCSI connector and power supply connector
a.
SCA type SCSI
The connector for the SCSI bus is an unshielded SCA-2 connector conforming to SCSI-3
type which has two 40-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.27 shows the
SCSI connector. See Section C.5 in Appendix C for signal assignments on the connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections
1.3 and 1.4 in SCSI Physical Interface Specifications.
Figure 4.27
SCA2 type SCSI connector