Garmin GDL 69/69A Installation Manual - Page 30
XM Radio Antenna to Receiver Signal Requirements, XM Signal Gain Requirements
View all Garmin GDL 69/69A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installation Procedure 2.6.4 XM Radio Antenna to Receiver Signal Requirements The XM Radio Receiver used in the GDL 69/69A has a system signal requirement of 20dB +/- 1dB gain from the input of the antenna to the input of the XM receiver internal to the GDL 69/69A. To insure the proper operation and optimum performance of the GDL 69/69A, the installation must meet the requirements specified in Table 1-6, and the installer must account for the signal gain and loss factors that exist between the antenna and the XM receiver. The gain/loss factors that need to be accounted for are shown in Figure 2-9. The GDL 69/69A has the capability to internally adjust for variances in the gain/loss factors by providing additional gain or loss within the range of +6dB to -4dB. If the GDL 69/69A gain/loss factor is outside this range, additional gain or loss must be added between the antenna and the GLD 69/69A RF input. Record the gain/loss components in Table 2-7. The variable attenuation value required to attain the GDL 69/69A gain/loss component will be programmed into the configuration module during post installation checkout. Figure 2-9. XM Signal Gain Requirements Page 2-14 Revision E GDL 69/69A Installation Manual 190-00355-02