Garmin Nuvi 650 Owner's Manual - Page 28

Using FM Traffic Using FM Traffic Use an optional FM TMC (Traffic Message Channel) traffic receiver to receive traffic information broadcast over the FM Radio Data System. For information about FM traffic receivers and coverage areas, see www.garmin .com/traffic. Note: The FM traffic receiver and nüvi must be in data range of an FM station transmitting TMC data to receive traffic information. Note: Garmin is not responsible for the accuracy of the traffic information. The FM traffic receiver simply receives signals from the traffic service provider and shows that information on your nüvi. Note: You do not need to activate the subscription included with your FM traffic receiver (if it came with one). Your nüvi receives traffic data as soon as it acquires satellite signals and receives traffic signals from the traffic service provider. 22 Note: You can only access the traffic information if the nüvi is connected to an FM traffic receiver. To power outlet in vehicle Power LED Status LED To power connector on nüvi cradle Note: If your FM TMC traffic receiver has an antenna with suction cups on it, route the antenna on your windshield vertically using the suction cups. LED Blink Codes The green Power LED lights when connected to external power. The Status LED indicates the signal reception: • Yellow dot-dash flashes: determining which country you are currently in. • Yellow solid: searching for signal. • Red solid: momentary sync loss. • Green solid: normal traffic data. nüvi 600/650 Owner's Manual