Gateway DC-M42 User Guide - Page 23
Loading an SD Memory Card optional accessory
UPC - 827103007510
View all Gateway DC-M42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Loading an SD Memory Card (optional accessory) The camera comes with 11MB of internal memory, allowing you to store images and video clips in the camera. However, you can expand the memory capacity by using the SD memory card so that you can store additional images and video clips. 1. Make sure the camera is turned off. 2. Slide the battery/SD memory card cover. 3. Insert the SD memory card. If the card cannot be inserted, check the orientation. 4. Close the battery/SD card cover. To remove the SD memory card, make sure the camera is off. Open the battery/SD card cover. Press lightly on the edge of the memory card and it will eject. To prevent valuable data from being accidentally erased from an SD memory card you can slide the write-protected tab (on the side of the SD memory card) to "LOCK". To save, edit or erase data on an SD memory card, you must unlock the card. 23