Gateway DC-M42 User Guide - Page 68
Power off time, Set to defaul
UPC - 827103007510
View all Gateway DC-M42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Power off time If the camera remains unused for a certain period of time while the camera is powered on, the camera will switch to an "idle" mode, and eventually turn itself off to conserve the power. Inactivity period (Batteries) 60 seconds 3 minutes Inactivity period (AC Power Adapter) 60 seconds 30 minutes Camera Status Stay idle Shut off If the camera is idle, re-activate the camera by pressing any button or rotate the mode dial. If the camera has powered-off then you must turn the camera on again by sliding the POWER switch. To change the power saving interval when the camera is charging with batteries, press / button in the main menu or press / button to enter the submenu and choose the setting. After the setting is set, press the OK button to confirm. [3 min], [5 min], [10 min], [30 min], [Off] The camera defaults to [3 min]. Set to default If you wish to restore all camera settings to their original status, select this option and then press the OK button. Then select [ No] or [Yes] by using the / button and then OK button to confirm. 68