Gigabyte GA-6KIEH2-RH Manual - Page 43

Serial Port B, COM Port Address, Baud Rate, Console Type, Flow Control, Console Connection

Get Gigabyte GA-6KIEH2-RH PDF manuals and user guides View all Gigabyte GA-6KIEH2-RH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Serial Port B This allows users to configure serial prot B by using this option. BIOS Setup Enabled Disabled Enable the configuration (Default setting) Disable the configuration. Base I/O address 3F8/IRQ4 Set IO address to 3F8/IRQ4. 2F8/IRQ3 Set IO address to 2F8/IRQ3. (Default setting) 3E8/IRQ4 Set IO address to 3E8/IRQ4. 2E8/IRQ3 Set IO address to 2E8/IRQ3. COM Port Address If this option is set to enabled, it will use a port on the motherboard to runconsole redirection function. Onboard serial Port A Use Serial Port A as the COM port address. Onboard serial Port B Use Serial Port B as the COM port address. Disabled Baud Rate Disable this function. (Default setting) This option allows user to set the specified baud rate. Options 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K. Console Type This option allows user to select the specified terminal type. This is defined by IEEE. Options VT100, VT100 8bit, PC-ANSI 7bit, VT100+, VT-UTF8 Flow Control This option provide user to enable the flow control function. None Not supported. XON/OFF Software control. CTS/RTS Hardware control. (Default setting) Console Connection This field indicates whether the console is connected directly to the system or a modem is used to connect. Direct Console is connected directly to the system. (Default setting) 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
43
BIOS Setup
Serial Port B
This allows users to configure serial prot B
by using this option.
Enabled
Enable the configuration (Default setting)
Disabled
Disable the configuration.
Base I/O address
3F8/IRQ4
Set IO address to 3F8/IRQ4.
2F8/IRQ3
Set IO address to 2F8/IRQ3. (Default setting)
3E8/IRQ4
Set IO address to 3E8/IRQ4.
2E8/IRQ3
Set IO address to 2E8/IRQ3.
COM Port Address
If this option is set to enabled, it will use a port on the motherboard to runconsole redirection
function.
Onboard serial Port A
Use Serial Port A as the COM port address.
Onboard serial Port B
Use Serial Port B as the COM port address.
Disabled
Disable this function. (Default setting)
Baud Rate
This option allows user to set the specified baud rate.
Options
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K.
Console Type
This option allows user to select the specified terminal type. This is defined by IEEE.
Options
VT100, VT100 8bit, PC-ANSI 7bit, VT100+, VT-UTF8
Flow Control
This option provide user to enable the flow control function.
None
Not supported.
XON/OFF
Software control.
CTS/RTS
Hardware control. (Default setting)
Console Connection
This field indicates whether the console is connected directly to the system or a modem is
used
to connect.
Direct
Console is connected directly to the system. (Default setting)