Harman Kardon BDS 2 SO Owners Manual - Page 16

BDS Connections Connecting the Subwoofer (all systems) Use the supplied mono RCA audio cable (purple connectors) to connect the subwoofer's Line-Level LFE In connector to the BDS receiver's Subwoofer output. BDS Receiver (BDS 2 shown) Connecting a TV or Video Display Use the supplied HDMI cable to connect the BDS receiver's HDMI output to your TV/video display's HDMI input. The BDS receiver is HDMI version 1.3a. To Subwoofer Output TV Mono RCA Cable (included) Subwoofer To Line Level PL0004-01001 LFE In IMPORTANT: Do not plug the subwoofer's AC power cord into an AC outlet at this time. Connecting the Radio Antenna Connect the supplied antenna to the Radio Antenna connection, as shown in the illustration below. Fully extend the antenna wire and move it to different positions until you get the best reception of your favorite stations. NOTE: The HDMI connection will deliver both video and audio to your TV or video display. We suggest disabling your TV or video display's audio system to take full advantage of your BDS system's superior audio reproduction. 16