HP 1320 HP LaserJet 1320nw - User Guide - Page 14

Chapter overview This chapter contains information that will be useful if you are installing the printer to a wireless network, or if you are changing printer or network settings after you have installed the printer. Specifically, this chapter contains a description of the printer Wireless light and the network configuration page, and an overview of the embedded Web server (EWS) and the HP toolbox. In addition, this chapter contains procedures for resetting the printer network setting and for switching between wireless and wired communications. The procedure you follow for installing the printer to a wireless network depends on whether the network communicates through an infrastructure mode or through an ad-hoc mode. You can find procedures for installing the printer to a wireless network in the HP LaserJet 1320nw printer Wireless Start guide that was packaged with the printer. For more information about infrastructure and ad-hoc networks, see Wireless networking basics. Note For maximum efficiency, HP recommends the printer be connected to a network that uses the infrastructure communication mode. Note The printer cannot be connected to a wired and wireless network at the same time. Printer Wireless light The HP LaserJet 1320nw printer has an internal networking component that provides wireless connectivity. To view the status of the wireless communications, the printer contains a Wireless light. ● If the light is on, the printer is connected to a wireless network. ● If the light flashes, the printer is scanning for a wireless network. ● If the light is off, wireless networking is disabled. 8 2 Support information for installing to a wireless network ENWW