HP 1320 HP LaserJet 1320nw - User Guide - Page 19
Access Point HW, Signal Strength
UPC - 829160406831
View all HP 1320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Field Signal Strength (1-5) Access Point HW Address Channel Description The transmitting or return signal graded on a scale of 1 to 5: ● 5 - Excellent ● 4 - Good ● 3 - Fair ● 2 - Poor ● 1 - Marginal ● No signal: no signal detected on the network ● : signal strength is left blank when the printer is scanning for an SSID. ● Not applicable: this parameter does not apply to ad-hoc networks. The hardware address of the access point on the network to which the printer is connected: ● : the unique MAC (media access control) hardware address of the access point. ● Not applicable: this parameter does not apply to ad-hoc networks. The channel number currently being used for wireless communication. This depends on the network in use, and might differ from the requested channel number. The value is from 1 to 14; countries/regions might limit the range of approved channels. ● : value ranging from 1 to 14, depending on country/region. ● None: no channel is in use. ● Not Applicable: the WLAN is disabled. Note In ad-hoc mode, if you are not able to receive or transmit data between your computer and the printer, make sure that you are using the same communication channel on your computer and the printer. In infrastructure mode, the channel is dictated by the access point. ENWW Network configuration page 13