HP 2710p HP Compaq 2710p Notebook PC - Maintenance and Service Guide - Page 48
Hard drive, Lift the rear edge of the hard drive compartment cover
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Hard drive NOTE: All hard drive spare part kits include an isolator and connector cable. Description 120-GB, 5400-rpm hard drive 120-GB, 4200-rpm hard drive 100-GB, 4200-rpm hard drive 80-GB, 4200-rpm hard drive 60-GB, 4200-rpm hard drive 64-GB solid-state drive Spare part number 488588-001 488587-001 454671-001 454670-001 454669-001 463602-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). Remove the hard drive: 1. Loosen the six Phillips PM2.0×5.0 captive screws (1) that secure the hard drive compartment cover to the computer. 2. Lift the rear edge of the hard drive compartment cover (2), swing it up and forward, and remove the cover. The hard drive compartment cover is included in the Plastics Kit, spare part number 454685-001. 3. Remove the two Phillips PM2.0×3.0 screws (1) that secure the hard drive bracket to the computer. 40 Chapter 4 Removal and replacement procedures