HP 2710p HP Compaq 2710p Notebook PC - Maintenance and Service Guide - Page 68
Remove the Phillips PM2.0×6.0 screw, that secures the speaker to the base enclosure.
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Remove the speaker: 1. Disconnect the speaker cable (1) from the system board. 2. Remove the speaker cable (2) from the clip built into the base enclosure. 3. Remove the Phillips PM2.0×6.0 screw (3) that secures the speaker to the base enclosure. 4. Remove the speaker (4) from the base enclosure. Reverse this procedure to install the speaker. 60 Chapter 4 Removal and replacement procedures
Remove the speaker:
1.
Disconnect the speaker cable
(1)
from the system board.
2.
Remove the speaker cable
(2)
from the clip built into the base enclosure.
3.
Remove the Phillips PM2.0×6.0 screw
(3)
that secures the speaker to the base enclosure.
4.
Remove the speaker
(4)
from the base enclosure.
Reverse this procedure to install the speaker.
60
Chapter 4
Removal and replacement procedures