HP 2710p HP Compaq 2710p Notebook PC - Maintenance and Service Guide - Page 59
Rear plastic bezel
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
7. Release the ZIF connector (2) to which the keyboard cable is attached, and disconnect the keyboard cable (3) from the system board. 8. Remove the keyboard. Reverse this procedure to install the keyboard. Rear plastic bezel NOTE: The rear plastic bezel is included in the Plastics Kit, spare part number 454685-001. Before removing the rear plastic bezel, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the hard drive compartment cover (see Hard drive on page 40). 6. Remove the keyboard (see Keyboard on page 49). Remove the rear plastic bezel: 1. Turn the computer upside down, with the rear panel toward you. Component replacement procedures 51