HP 2710p HP Compaq 2710p Notebook PC - Maintenance and Service Guide - Page 75
Fan/heat sink assembly, Rear plastic bezel see - hard drive type
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
● Thin foil-type strip that fits onto the heat shield atop the system board, spare part number 459912-001. To install the strip, place it into the slot on the heat shield, making sure the strip is under the tabs in the slot. Fan/heat sink assembly Description Fan/heat sink assembly (includes replacement thermal material) Spare part number 454692-001 Before removing the fan/heat sink assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the following components: a. Hard drive compartment cover (see Hard drive on page 40) b. Keyboard (see Keyboard on page 49) c. Rear plastic bezel (see Rear plastic bezel on page 51) d. Top cover (see Top cover on page 53) e. Display assembly (see Display assembly on page 61) f. System board (see System board on page 64) Component replacement procedures 67