HP 2710p HP Compaq 2710p Notebook PC - Maintenance and Service Guide - Page 66
Bluetooth module
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Reverse this procedure to install the audio connector board. Bluetooth module Description Bluetooth (includes cable) Spare part number 454691-001 Before removing the Bluetooth module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the following components: a. Hard drive compartment cover (see Hard drive on page 40) b. Keyboard (see Keyboard on page 49) c. Rear plastic bezel (see Rear plastic bezel on page 51) d. Top cover (see Top cover on page 53) e. Audio connector board (see Audio connector board on page 57) Remove the Bluetooth® module: 1. Disconnect the Bluetooth module cable (1) from the system board. 2. Remove the Bluetooth module cable from the clips (2) built into the base enclosure. The Bluetooth module cable is included with the Bluetooth module and is also available in the Cables Kit, spare part number 454682-001. 3. Remove the Phillips PM2.0×5.0 screw (3) that secures the Bluetooth module to the base enclosure. 58 Chapter 4 Removal and replacement procedures