HP 2710p HP Compaq 2710p Notebook PC - Maintenance and Service Guide - Page 65
Audio connector board, Remove the Phillips PM2.0×5.0 screw
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Audio connector board Description Audio connector board (includes cable) Spare part number 454690-001 Before removing the audio connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the following components: a. Hard drive compartment cover (see Hard drive on page 40) b. Keyboard (see Keyboard on page 49) c. Rear plastic bezel (see Rear plastic bezel on page 51) d. Top cover (see Top cover on page 53) Remove the audio connector board: 1. Release the ZIF connector (1) to which the audio connector board cable is connected and disconnect the audio connector board cable (2) from the system board. The audio connector board cable is included with the audio connector board and is also available in the Cables Kit, spare part number 454682-001. 2. Remove the Phillips PM2.0×5.0 screw (3) that secures the audio connector board to the base enclosure. 3. Remove the audio connector board and cable (4). Component replacement procedures 57