HP 2710p HP Compaq 2710p Notebook PC - Maintenance and Service Guide - Page 70
Speaker, Remove the following components
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4. Remove the Bluetooth module and cable (4) from the base enclosure. Reverse this procedure to install the Bluetooth module. Speaker Description Speaker Spare part number 454695-001 Before removing the speaker, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the following components: a. Hard drive compartment cover (see Hard drive on page 41) b. Keyboard (see Keyboard on page 50) c. Rear plastic bezel (see Rear plastic bezel on page 52) d. Top cover (see Top cover on page 54) e. Audio connector board (see Audio connector board on page 58) f. Bluetooth module (see Bluetooth module on page 59) 60 Chapter 4 Removal and replacement procedures