HP 2710p HP Compaq 2710p Notebook PC - Maintenance and Service Guide - Page 71
Remove the Phillips PM2.0×6.0 screw, that secures the speaker to the base enclosure.
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Remove the speaker: 1. Disconnect the speaker cable (1) from the system board. 2. Remove the speaker cable (2) from the clip built into the base enclosure. 3. Remove the Phillips PM2.0×6.0 screw (3) that secures the speaker to the base enclosure. 4. Remove the speaker (4) from the base enclosure. Reverse this procedure to install the speaker. Component replacement procedures 61
Remove the speaker:
1.
Disconnect the speaker cable
(1)
from the system board.
2.
Remove the speaker cable
(2)
from the clip built into the base enclosure.
3.
Remove the Phillips PM2.0×6.0 screw
(3)
that secures the speaker to the base enclosure.
4.
Remove the speaker
(4)
from the base enclosure.
Reverse this procedure to install the speaker.
Component replacement procedures
61